Black lid and baffle fitted on a Fluval C2 power filter, close view of the top

Lid and Baffle for Fluval C2 Power Filter, Replaces Both Lid Pieces

$22.00
Skip to product information
Black lid and baffle fitted on a Fluval C2 power filter, close view of the top
  • Black lid and baffle fitted on a Fluval C2 power filter, close view of the top
  • Black lid and baffle installed on a Fluval C2 power filter, with return water flowing softly into the tank
  • Fluval C2 power filter with the black lid and baffle fitted, its textured baffle face spreading the return
  • Hand lifting the black back lid piece off a Fluval C2 filter, with the front lid and baffle still in place
  • Both black lid pieces for the Fluval C2 filter: the front lid with textured baffle and the narrow back piece
  • Black two-piece Fluval C2 lid and baffle seen from below, showing the U-tube holder and back piece fittings
  • Front lid and baffle for the Fluval C2 filter, showing the curved textured baffle that slows the return
  • Underside of the narrow back lid piece for the Fluval C2, with holders for the float indicator and pad
  • Top of the narrow black back lid piece for the Fluval C2 filter, with two square openings and a round hole
Lid and Baffle for Fluval C2 Power Filter, Replaces Both Lid Pieces

Lid and Baffle for Fluval C2 Power Filter, Replaces Both Lid Pieces

$22.00

Fits: Fluval C2 Power Filter

Not sure which filter you have?
  • Replaces both stock lid pieces, with no loss of function.
  • The back piece takes the float indicator and the poly or foam pad holder.
  • Holds the U-tube in place.
  • Flat $4.88 shipping for your whole US order
  • Ships Mon, Wed & Fri. Arrives 2–5 business days after it ships.
  • Damaged or wrong? Refund or a new part within 30 days. Our policy

About this part

Strong return flow from a C2 power filter can push delicate fish around, stir up a big wake and disturb your aquascape. This full lid replacement adds a baffle that softens the flow as it enters the tank, and its precise fit, firmer than the stock lid, ends the rattle.

Compatibility
  • Fits: the Fluval C2 power filter.
Why it helps
  • Replaces both stock lid pieces, with no loss of function.
  • The back piece takes the float indicator and the poly or foam pad holder.
  • Holds the U-tube in place.
  • Calms the return flow.
Installation
  1. Take off both stock lid pieces.
  2. Set the back piece, with the float indicator and pad holder, in place.
  3. Set the lid and baffle on top.
In the box

One two-piece lid and baffle, in black.

Designed and 3D printed in Pennsylvania. One flat shipping price covers your whole US order, so a second part ships for no extra cost.

More for your filter

See all